Monday, July 15

 

All Sessions are 9:00 am – 4:00 pm unless otherwise noted.

​

Crio Printer new machine and training

The Crio Digital transfer printer is a fantastic solution for putting custom designs on T-Shirts. Participants will learn how to use the Crio to create and print designs onto garments, tote bags, coasters, rally towels etc. Options for this training are tailored to what you need. You can choose to receive the printer, a heat press, and a hat press, or training only if you already have a Crio and need a refresher. This session is for the printer and training. See additional options below.

$ 7,600.00

​

Hotronix Fusion 16 x 20 Heat press for use with Crio Printer

Choose this option if you want to add a heat press for your Crio printer.

$ 2,600.00

​

Hotronix IQ 360 Cap Press for use with Crio Printer

Choose this option if you want to add a hat press for your Crio printer.

$ 2,000.00

​

Crio Printer - TRAINING ONLY (supplies included for project)

Choose this option if you need TRAINING only and no CRIO equipment. You will receive the supplies to complete the project. NO EQIUPMENT IS INCLUDED IN THIS SESSION.

$ 150.00

​

“CNC Router Essentials” for Beginners with equipment

Do you have a Router CNC table that is collecting dust? Are you not quite sure how to use it or V-Carve? Come and spend the day with us to learn how to use your table and how to integrate it into your class. Participants will receive and be trained on using the Shark SD120 and V-carve software. All participants will be given the book “CNC Router Essentials” and a flash drive we will use for the training. We go over setting up your machine for the 1st time, project design (CAD), converting to artwork to vectors, converting vectors to toolpaths (CAM), and toolpath file transfer to the machine. You will leave the training with a small project that could be finished in a few hours. The project design discussion would be useful for anyone that uses V-Carve for a CAD program regardless of the project finishing tool.

$ 3,600.00

​

“CNC Router Essentials” for Beginners TRAINING ONLY

Do you have a Router CNC table that is collecting dust? Are you not quite sure how to use it or V-Carve? Come and spend the day with us to learn how to use your table and how to integrate it into your class. Participants will be trained using the Shark SD120 and V-carve software. All participants will be given the book “CNC Router Essentials” and a flash drive we will use for the training. We go over setting up your machine for the 1st time, project design (CAD), converting to artwork to vectors, converting vectors to toolpaths (CAM), and toolpath file transfer to the machine. You will leave the training with a small project that could be finished in a few hours. The project design discussion would be useful for anyone that uses V-Carve for a CAD program regardless of the project finishing tool. NO EQIUPMENT IS INCLUDED IN THIS SESSION.

$ 100.00

​

Building Custom Log Furniture

Are you interested in developing skills to allow students opportunities in entrepreneurship and custom log furniture. Come to this fast paced training and skill session to learn the tools of the trade amd make a piece of furniture. Includes materials and tools needed to start in your classes.

$ 1,600.00

​

Small Ruminant Health and Parasite Analysis 101

Ready to refresh and learn about small ruminant parasite identification, examining fecal counts and comparing techniques of specimen preparation including using a centrifuge and parasite control methods? Participants will leave with materials to produce fecal counts, a centrifuge, small animal restraint stand, and electric hoof trimmers. FAMACHA certification will be in the afternoon with completion upon submission of requirements. Additional practice using equipment will also be in the afternoon.

$1,500.00

​

Pawsitive Handling: Mastering Safety & Techniques in Grooming

Join us for an informative workshop on Pawsitive Handling: Mastering Safety and Techniques in Grooming! Learn essential skills for safely handling animals and perfecting grooming techniques. This workshop is perfect for educators looking to enhance their knowledge and skills in caring for our furry friends, certifications for students, and how to set up a grooming business. Participants will receive recommended grooming equipment for this session.

$ 1,500.00

​

Got a Green Thumb? Plant Propagation Essentials

Get your green thumbs ready as you engage in developing propagation techniques on tomato seedlings and learning the industry standards in tomato grafting. Participants will leave with materials needed to replicate in classroom or greenhouse environements including humidifier, containers, clips, grafting tools, and greenhouse label identification.

$1,300.00

​

Raspberry PI

Discover the fusion of technology and the physical world using Raspberry Pi 400 and Python coding language. This training introduces you to physical computing, where you'll create programs that interact with real-world elements like sensors, buttons, and LEDs. Learn coding basics through Turtle Graphics, then advance to controlling circuits with LEDs, buttons, and sensors. Great introduction to coding and sensors found in the 2 new CTE CS Related Courses as well as any computer science course. Each participant will receive a Raspberry Pi 400 kit, a portable monitor, and a breadboarding/sensor kit.

$ 400.00

​

Raspberry PI TRAINING ONLY

Discover the fusion of technology and the physical world using Raspberry Pi 400 and Python coding language. This training introduces you to physical computing, where you'll create programs that interact with real-world elements like sensors, buttons, and LEDs. Learn coding basics through Turtle Graphics, then advance to controlling circuits with LEDs, buttons, and sensors. Great introduction to coding and sensors found in the 2 new CTE CS Related Courses as well as any computer science course. NO EQIUPMENT IS INCLUDED IN THIS SESSION.

$ 50.00

​